Your Cart (0)
.jpg){kind=logo}
Thumbnail Filmstrip of EXTEC® Labcut 250B Images
Product Discontinued
- Hard Steels
- Tool Steels
- Cast Iron
- Steel and Nickel Alloys
- Non-ferrous Metals eg. Aluminum, Brass, Titanium
- Ceramics
- Glass
- Composite Materials
- Hard metals e.g. Carbides
- The Labcut 250 also cuts bar and tube
The machine bed is a T-slot base on which the vises are mounted. The standard machine is supplied with right hand and left hand quick action vises having 2 ½ inch (64mm) capacity. The material is clamped on either side of the cut ensuring minimum burr. Long lengths of material can be easily handled using access ports on both sides of the canopy.
A 4.4-gallon (17 l) with 55-liter/min pump circulates fluid on both sides of the rotating wheel and floods the work area. If dry cutting is required, the coolant circulation can be stopped. The coolant circulation system can also be used as a wash down facility; suitable controls for this are located on the front panel.
The electrical components are housed in a closed cabinet located behind the control panel. The front panel switching is via 24 V control circuits and therefore complies with even the most rigorous safety codes. Front panel controls include cutting head motor on/off , coolant pump on/off and internal light switch. The Labcut 250B has been designed with operator safety in mind. A timed safety switch prevents the canopy from being opened while the cutting wheel is rotating.
4 HP (3kW) 3 Phase Motor - specify voltage
Spindle Diameter:
Maximum 1 1/4 inch (32mm) diameter
Wheel Speed:
Standard 3900 rpm
Wheel Size:
10 inch (254mm) maximum (smaller diameter wheels can be fitted
Dimensions:
Width: 20.2" (512mm)
Depth: 27"(685mm)
Height: 24.4" (620mm)
Weight:
176 lbs. (80kg)
.jpg)