Your Cart (0)
.jpg){kind=logo}
Thumbnail Filmstrip of EXTEC Labcut® 350F Images
Manual oscillating movement significantly increases performance in various ways including: increasing cutting capacity along the length of the component, reducing heat through improved lubrication, and improving yield by reducing cutting time. Applied force needed is reduced improving user experience.
The abrasive cutting wheel is driven by a 3.8kW, 5hp motor which is complemented by Highly Efficient Torque Capabilities. The variable speed motor operates between 1000-4000 rpm.
The spacious (16” x 12” (400 mm x 300 mm)) machine bed consists of a treated aluminum base and 14 interchangeable stainless steel plates. The standard machine is provided with a Right and Left Vise Set.
The fully transparent canopy has access ports on both sides to easily handle long lengths of material. The cutting chamber is illuminated by an LED. The machine has an integrated cleaning system with hose and a safety interlock switch is fitted to prevent the canopy from being opened while the cutting wheel is rotating. The machine complies with rigorous cutting safety regulations.
A 16 gallon (60 liter) coolant tank with a 100u filter is on wheels and is located in the base unit. It is fitted with a recirculating pump which floods the working area via 2 stationary and 2 flexible coolant jets. If dry cutting is required, the coolant circulation pumped can be turned off. The base cabinet is equipped with a top drawer and a pocket on the door for manuals and other documents.
- Customizable 14 grid 16” x 12” (400 mm x 300 mm) T-Slot Stainless Steel Base
- Stationary Manual Vertical Movement
- Adjusting Manual Oscillating MovementRight and Left Vise Set
- Fully Transparent Canopy
- Access ports on both sides of canopy to easily handle long lengths of material
- 2 Stationary and 2 Flexible coolant jets to flood working areaIntegrated cleaning system with hose
- Safety locking system prevents canopy from being opened while cutting wheel is rotating
- Cutting chamber illuminated by an LED
- Variable Speed 1000-4000
- Accepts wheel diameter up to 14" (350 mm)
- 1-1/4" (32 mm) maximum spindle diameter
- Max Cutting Capacity 4-1/3" (110mm) with 12" (305 mm) wheel
- 400 volts, 50/60Hz, 3 Phase
- High efficiency torque driven motor 3.8 kW, 5 hp
- Dimensions: L 33" x W 25" x H 58" (840 mm x 630 mm x 1475 mm)
- Weight: 500 lb (~225 kg)
- Hard Steels
- Tool Steels
- Cast Iron
- Steel and Nickel Alloys
- Non Ferrous Metals
- Ceramics
- Glass
- Composites
- Carbide
- Bar & Tube
.jpg)