Extec

The Extec Labpress^® 40-50 Advanced Convertible Automatic Mounting Press is a versatile convertible system designed to mount samples from 1” – 2”. One heating element supports sample sizes 1”, 1-1/4” a 1-1/2”.  A separate heating element supports 2” samples.

Equipped with an exclusive heating and cooling system, it has a total cycle time of 5 minutes if the preheating element is in operation.  The preheating element keeps the unit at the start temperature for 20 minutes eliminating the need to heat from room temperature to curing temperature each cycle.  An audible alert notifies users when cycle is complete.

The Extec Labpress^® Advanced Automatic Mounting Press features a single EZ-TSK (Touch Screen Keypad) for simple user operation.  Users can set the temperature, pressure, heating, and cooling parameters from a central screen.  The unit has 4 pressure modes allowing users to modify based on the mounting compound or variety of parts being mounted.   The unit arrives with preset programs for common compression mounting compounds and is equipped with a USB port for simple saving and loading of customized programs.  

A water saving function allows users to conserve water consumption.

Mold assemblies are easily interchanged; it is not necessary to disconnect the air or electrical supply.   The unit is capable of double mounting by utilizing a spacer.

A simple, manual half turn lever allows access to the heating chamber and eliminates the need to twist and remove the top portion from the unit.

A water inlet and outlet are located on the rear panel.  The unit and operators are protected by a safety solenoid valve.   Located on opposite sides of the unit are panels allowing for convenient access; one for pneumatics and a second for electrical

• Exclusive heating and cooling system with a preheating element minimizing total cure time. Audible alert when cycle is complete.
• EZ-TSK Touch screen Keypad with centralized programming of temperature, pressure, heating, and cooling parameters.
• Simple, manual half turn levers allows access to the heating chamber
• Water conserving program (up to 25%)
• USB port to save & load programs
• Removable top portion for easy cleaning.
• Safety solenoid valve.  Separate pneumatic and electrical systems for easy maintenance.

• Interchangeable mold assemblies sizes from 1” to 2”. Double mounting with spacer.
• Chamber heating power: 4 x 600W
• Temperature range: 68°F - 400°F
• 230v, 1 phase
• Dimensions: 10” x 20” x 25” ( 250mm x 510 mm x 635 mm)
• Weight: 160 lb (73 kg)

This area is currently undergoing maintenance, please check back often for updates. For any questions, additional information or to place an order,
please call 1-860-741-3435 or contact us, thank you.